AceProAV AcePro-CE88-1 Скачать руководство пользователя страница 6

Страница: 6 / 12

PANEL DESCRIPTIONS

Transmitting unit

►

AcePro-CE88-1-TX

Slide Switch: for F/W update ([Left] Normal Mode; [Right] F/W update Mode)

RS-232

(terminal block format)

: The order of RS-232 pin are TX, RX, GND

(from the left side to the right)

HDMI IN: Connects to a HDMI source with HDMI male-male cable

IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver

IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster

Latch-locking power jack: Connect to 12V DC power supply

Power LED: Power indicator LED

Link LED: Link indicator LED

RJ45: Plug in a Cat-5/5e/6 cable that needs to be linked to the receiving unit AcePro-CE88-1-RX

Receiving unit

►

AcePro-CE88-1-RX

Slide Switch: for F/W update ([Left] Normal Mode; [Right] F/W update Mode)

RS-232

(terminal block format)

: The order of RS-232 pin are TX, RX, GND

(from the left side to the right)

HDMI OUT: Connects to a HDMI display with HDMI male-male cable

IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver

IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster

Latch-locking power jack: Connect to 12V DC power supply

Power LED: Power indicator LED

Link LED: Link indicator LED

RJ45: Plug in a Cat-5/5e/6 cable that needs to be linked to the transmitting unit AcePro-CE88-1-TX

Содержание AcePro-CE88-1












Результаты поиска

Содержание AcePro-CE88-1

Отзывы:

Похожие инструкции для AcePro-CE88-1

Бренды по названию

Популярные бренды

AceProAV AcePro-CE88-1, Быстрое руководство по установке

Результаты поиска

Содержание AcePro-CE88-1

Отзывы:

Похожие инструкции для AcePro-CE88-1

Бренды по названию

Популярные бренды