AceProAV AcePro-CE88-1, Быстрое руководство по установке

Страница: 5 / 12

- 4-
SPECIFICATIONS
Model Name AcePro-CE88-1
Technical
Role of usage
Transmitter [TX] Receiver [RX]
HDMI compliance HDMI 2.0a
HDCP compliance HDCP 2.2 & 1.4
Video bandwidth Single-link 594MHz [18Gbps]*
Video support HDR 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits)
HDMI over UTP 1080p@60 60m (198ft) [CAT5e]
Audio support Surround sound [up to 7.1ch) or stereo digital audio
Equalization Auto
Input TMDS signal 1.2 Volts [peak-to-peak]
Input DDC signal 5 Volts [peak-to-peak, TTL]
ESD protection [1] Human body model ± 15kV [air-gap discharge] & ± 8kV [contact discharge]
PCB stack-up 6-layer board [impedance control differential 100 ; single 50 ]
IR pass-thru Bi-directional
RS-232 support Yes
PoC support Yes
Input 1x HDMI / 1x 3.5mm 1x RJ-45 / 1x 3.5mm
Output
1x RJ-45 / 1x 3.5mm 1x HDMI / 1x 3.5mm
In / Out 1x RS-232 1x RS-232
HDMI source control Controllable via IR pass-through from RX to TX with IR extenders
HDMI connector Type A [19-pin female]
Min DIN connector DIN-9
RJ-45 connector WE/SS 8P8C(Reverse Mode)
Rotary control switch None
3.5mm connector IR receiver / IR blaster IR receiver / IR blaster
Mechanical
Housing Metal enclosure
Dimensions
113 x 94 x 30mm [4.4" x3.7" x1.2"] 113 x 94 x 30mm [4.4" x3.7" x1.2"]
Weight 151g[6.3 oz] 154g[6.3 oz]
Fixedness Wall-mounting case with screws
Power supply 12V DC
Power consumption 3 Watt [max] 7 Watt [max]
Operation temperature 0~40° C [32~104° F]
Storage temperature -20~60° C [-4~140° F]
Relative humidity 20~90% RH [no condensation]
Due to the higher power consumption on the receiving unit, we strongly suggest you plugging
power adapter from the transmitting unit to avoid system at higher temperature level.
*Not support 533MHz !