light (Charging immediately or power off will remove this status).
12.
Interface switching:
In off state or working state, switch between AUX and SPDIF through the toggle
switch(If choose SPDIF mode,the optical interface using SPDIF OUT in RX mode)
12.
SK-BTI-029 working while charging
When need to use the SK-BTI-029 for long time, due to the limited built-in battery usage time,
it allowed to connect the charging power supply (DC 5V ≥300mA, when the battery is low or
when the power supply of poor quality may cause the current sound appears); Note: it is not
recommend to use this function while charging , otherwise it may affect battery life.
.
Working in Transmitter mode
1,SK-BTI-029 and stereo Bluetooth headphone or Bluetooth speaker (A2DP enabled)
work on the TV
A, Make the Bluetooth speaker or Bluetooth headset in pairing mode.
B, Press MFB around 3 seconds until Blue LED flashes quickly to enter into searing mode, if
SK-BTI-029 does not enter into pairing mode, press double click MFB ( keep the operation
consistently ) to enter into pairing mode.
C, Put the SK-BTI-029 and Bluetooth speaker or Bluetooth headset together, around 30s
seconds later, BTI-029 will connect with Bluetooth speaker or Bluetooth headset automatically
D. Connect the SK-BTI-029 and TV with fiber optic cable or 3.5mm audio cable(headphone
cable interface) or optical output interface(SPDIF IN)
E. It could hear the sound coming from TV in the Bluetooth headset or Bluetooth speaker. If
no sound from the Bluetooth speaker or Bluetooth headset, please check the aux output or
fiber optic output setting on TV , the volume of the TV is loud enough, the cable connects right
or not. Use your finger to touch the DC part of the audio cable that connected with SK-BTI-
029 to check if the audio source has problems. When the connection is successful and the
volume of headset or speaker is big enough, you will hear a “zi,zi” sound, it means SK-BTI-
029 and Bluetooth speaker or Bluetooth headphone and cables are ok, the problem may be
on the audio source (TV
）
.
2,
SK-BTI-029
and Bluetooth headset or Bluetooth speaker (which must support A2DP )
work together on the computer.
A. Make the Bluetooth speaker or Bluetooth headset in pairing mode.
B. Press MFB around 3 seconds until Blue LED flashes quickly to enter into pairing mode, if
SK-BTI-029 does not enter into pairing mode, double click MFB ( keep the action
consistently )) to enter into pairing mode.
C. Put the SK-BTI-029 and Bluetooth speaker or Bluetooth headphone together, around 30
seconds later, SK-BTI-029 will connect with Bluetooth speaker or Bluetooth headphone
automatically.
D. Connect the SK-BTI-029 and computer with fiber optic cable or 3.5mm audio
cable(headphone cable interface) or optical output interface(SPDIF IN)
E. It could hear the sound coming from computer in the Bluetooth headset or Bluetooth
speaker. If no sound in the Bluetooth speaker or Bluetooth headset, please check the aux
output setting on computer is the headset output or fiber optic output, the volume of the
