background image

1. POWER

Turn the air conditioner on and off.

2. Cool

Press the COOL button to COOL mode.

3.       

and

       

Use these buttons on the control panel and remote to increase or decrease the Set 

Temperature or Timer. 

Temperature range:

 61

°

F~88

°

F or 16

°

C~31

°

C .

4. Sleep

Press the SLEEP button, all of the display lights will turn off after a while, but the Sleep 

light is always on. In SLEEP mode, the air conditioner will automatically adjust the tem- 

perature and fan speed to make the room more comfortable during the night. The set 

temperature will automatically raise every 30-60 minutes and at most change six times 

until the set temperature is 81

°

F or 82

°

F.

5. Timer

Use these buttons on the control panel and remote to set the Timer.

Timer Off: 

The timed stop is programmed by pressing TIMER button. Set the rest time by 

pressing the button           or           until the rest time displayed is to your demand then 

press TIMER button again.

Timer On:

 When the unit is off, press TIMER button at the first time, set the temperature

 

with pressing the button           or          . Press TIMER button at the second time, set the 

rest time with pressing the button           or           . Press TIMER button at the third time, 

confirm the setting, then it will show on the display. 

Note: 

It can be set to automatically turn off or on in 0.5-24 hours. Each press of the

 

          buttons will increase or decrease the timer. The Timer can be set in 0.5 hours 

increment below 10 hours and 1 hour increment for 10 hours or above. The SET light 

will turn on while setting. To cancel the set function, press the TIMER button again.

6. Auto Mode

In AUTO mode the unit automatically chooses the mode of operation (COOL, DRY or FAN). 

In this mode the temperature will be set automatically according to the room temperature 

(tested by the temperature sensor which is incorporated in the indoor unit.).

7. Fan Speed

Press the FAN SPEED button to choose the fan speed options. You can choose HIGH, 

MED, LOW or auto speed in COOL mode and choose HIGH, MED, LOW in FAN mode.

8. Display

To press the DISPLAY button, it can switch off/on all lights or LED display.

Your home in sync

17

Содержание CW1

























Отзывы: