background image

Failure

Solution

The Yomper stalls

This can happen if the slope is too steep, or the chair is too heavy, 

or if wheelchair tires are deflated. You may have to manually 

assist the Yomper or adjust speeds when travelling up a steep 

slope. This is a safety measure to avoid engine overheating.

When your battery is low (<20%), it can also happen that the 

Yomper «stalls» during intense effort. After a few seconds you 

will be able to set-off again. We recommend that you assist the 

Yomper on steep slopes. You will be able to use the Yomper 

without assist on flatter surfaces.

We recommend that you recharge your battery.

If you have many routes requiring constant effort from the 

Yomper, or in case of heavy user weight, we recommend the 

optional battery (higher amp-hours) which will be more efficient 

over time.

In indoor mode (green LED), too much resistance stops the 

motor (similar to  using your hands to  brake via the handrails).

Switch to outdoor mode or increase the resistance.

The Yomper does not stop

In indoor mode, this can happen if the resistance level is set too 

high.
In the parameter setting, reduce the resistance

If pressing the main button on EasyGo does not turn off Drive 

unit power,  switch off the Yomper and the EasyGo controller 

box and contact your dealer immediately.

21

Содержание YOMPER+





























Отзывы: