Ace Ultra Sagan, Инструкция

Страница: 7 / 24

Horizontal Stabilizer
The stab comes as preassembled as
possible and should look like shown on
the
picture. For help get the servo cable
through the hole take a peace of 1,5
mm wire and bend one end 90 degree
around. Slide the servo cable in the
servo slot and pull the servo cable out
of the hole while using your tool .
For screw the servo in to the stabilizer
use the self taping screws 3x16mm
For the linkage take the 70 mm M3
Rod
And 2 plastic ball link with the M3 x
16mm with the locknut.
The stabilizer are get screwed through
the aluminum tube with the M3 x
12mm