Dear customer,
Thank you for choosing to purchase a ACE brand prod-
uct. Thanks to its technology, design and operation and
the fact that it exceeds the strictest quality standards,
a fully satisfactory use and long product life can be
assured.
1. Parts description
1- Timer and heat settings
2- On/Off switch
3- Visor
4- Hood sliding cap
5- Top pole
6- Tension adjustment ring
7- Base pole
8- Connection ring
9- Base legs
10- Base center piece
11- Base wheels
12- Bolt washer
2. Safety advice and warnings!
Read these instructions carefully before switching on
the appliance and keep them for future reference. Fail-
ure to follow and observe these instructions could lead
to an accident. Clean all the parts of the product that
will be in contact with face, as indicated in the cleaning
section, before use.
2.1. Use or working environment:
2.1.1. Keep the working area clean and well lit. Clut-
tered and dark areas invite accidents.
2.1.2. Use the appliance in a well ventilated area.
2.1.3. Do not place the appliance on hot surfaces, such
as cooking plates, gas burners, ovens or similar items.
2.1.4. Keep children and bystanders away when using
this appliance.
2.1.5. Place the appliance on a horizontal, flat, stable
surface away from other heat sources.
2.1.6. Do not use the appliance in association with a
programmer, timer or other device that automatically
switches it on.
2.1.7. Do not use the appliance if the cable or plug is
damaged.
2.1.8. Ensure that the voltage indicated on the rating
label matches the mains power supply voltage before
plugging in the appliance.
2.1.9. Connect the appliance to the mains power sup-
ply with an earth socket withstanding a minimum of 10
amperes.
2.1.10. The appliance’s plug must fit into the mains
power supply socket properly. Do not alter the plug.
2.1.11. If using a multi plug check ratings carefully as
the current used by several appliances could easily
exceed the rating of the multi plug.
2.1.12. If any of the appliance casings breaks, imme-
diately disconnect the appliance from the mains power
supply to prevent the possibility of an electric shock.
2.1.13. Do not use the appliance if it has fallen on the
floor or if there are visible signs of damage.
2.1.14. Do not force the power cord. Never use the
power cord to lift up, carry or unplug the appliance.
2.1.15. Do not wrap the power cord around the appli-
ance.
2.1.16. Do not clip or crease the power cord.
2.1.17. Do not allow the power cord to hang or to
come into contact with the surfaces.
2.1.18. Check the state of the power cord. Damaged or
tangled cables increase the risk of electric shock.
2.1.19. Power cord should be regularly examined for
signs of damage, and if the cord is damaged, the appli-
ance must not be used.
2.1.20. Do not touch the plug with wet hands.
1
2
3
4
5
6
7
8
9
10
11
12
SHD14_IM_UPDATED.indd 2
2017/04/20 9:25:58 AM
