Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 156 / 418

Chapter 4 Configuration Installation and Operation Manual
4-66 Configuring for Operation ACE-3105, ACE-3205 Ver. 5.2
³
To access the ATM configuration menu:
•
From the Applications menu, select ATM.
The ATM menu is displayed.
ACE-3205 – RAD Data Communications
Configuration> Applications> ATM
1. Traffic descriptor (TD) >
2. OAM >
3. IMA >
4. ATM cross connect (XC) >
5. CES cross connect (XC) >
6. VCL Interface >
7. Max VPI bits ... (12)
>
Please select item <1 to 6>
ESC-Previous menu; !-main menu; &-exit
Figure 4-50. ATM Menu
Table 4-43. ATM Menu Parameters
Parameter Description Possible Values
Traffic descriptor (TD) Provides access to the traffic
descriptors configuration Refer to
Figure 4-51
OAM Provides access to the OAM
loopback configuration Refer to
Figure 4-52
IMA Provides access to the IMA
configuration menu Refer to
Figure 4-54
ATM cross connect (XC) Provides access to the ATM XC
parameters configuration Refer to
Figure 4-55
CES cross connect (XC) Provides access to the CES XC
parameters configuration Refer to Figure 4-56
VCL Interface Provides access to the VCL interface
parameter configuration Refer to Figure 4-57
Max VPI bits Defines whether the ATM ports
operate in UNI (8 bits) or NNI (12
bits) mode.
Note: This parameter cannot be
changed when connections or IMA
groups are defined.
8 – For UNI
12 – For NNI
Default: 12x