Ace ACE-3205, Инструкция по установке и эксплуатации, Страница: 107 / 418

Installation and Operation Manual Chapter 4 Configuration
ACE-3105, ACE-3205 Ver. 5.2 Configuring for Management 4-17
ACE-3205 – RAD Data Communications
Configuration> System> Management> Management Access
1. SNMP > (Enable)
2. Telnet > (Enable)
3. WEB > (Disable)
4. Radius parameters >
5. Access policy >
>
Please select item <1 to 5>
ESC–previous menu; !–main menu; &-exit
Figure 4-14. Management Access Menu
Table 4-12. Management Access Menu Parameters
Parameter Description Possible Values
SNMP Remote management access via SNMP.
Note: When SNMP access is disabled, the
SNMP agent does not send traps.
Enable
Disable
Default: Enable
Telnet Remote management access via Telnet.
Secure Telnet access is secured by a Secure
Shell (SSH) client/server program, which
provides a secure communication channel.
Note: Telnet access cannot be disabled
when there are active Telnet management
sessions.
Enable
Disable
Secure
Default: Enable
WEB Remote management access via the Web.
Secure Web access if secured by a secure
socket layer (SSL) protocol, which encrypts
the data between the TCP and HTTP Web
layers.
Note: Web access cannot be disabled when
there are active Web management sessions.
Enable
Disable
Secure
Default: Disable
Radius
parameters Define the Radius server access parameters See Setting the Radius
Server Parameters
Access policy Set the availability and priority of the user
access methods See Setting the Access
Policy
Setting the Radius Server Parameters
If ACE-3105, ACE-3205 would be required to authenticate users via a centralized
Radius server in a given application, the required parameters must be configured.
³
To access the Radius server options:
• From the Management Access menu (see Figure 4-14 ), select Radius
parameters.