Ace ACE-3105, Инструкция по установке и эксплуатации

Страница: 177 / 418

Installation and Operation Manual Chapter 4 Configuration
ACE-3105, ACE-3205 Ver. 5.2 Configuring for Operation 4-87
Configuring Router Parameters
The router functionality allows ACE-3105, ACE-3205 to establish an IP link with
the management station(s), and also allows management traffic to be carried
transparently through the unit towards specified targets, over pseudowire
connections or other channels.
³
To access the router options:
•
From the Applications menu (see
Figure 4-49
), select Router.
The Router menu is displayed.
ACE-3205 – RAD Data Communications
Configuration> Applications> Router
1. Interface >
2. Static route >
3. Default gateway >
4. System address ... (100.100.100.100)
5. ARP aging time (sec) ... (1200)
>
Please select item <1 to 5>
ESC-previous menu; !-main menu; &-exit
Figure 4-63. Router Menu
Table 4-56. Router Parameters
Parameter Description Possible Values
Interface Access the router interface configuration See Configuring Router
Parameters
below
Static route Access the static route parameters See
Setting the Static
Route Parameters
Default gateway Access the default gateway definitions See
Setting the Default
Gateway
System address The unique IP address that represents
this ACE-3105, ACE-3205 unit (does not
represent an IP subnet).
Note:
• This IP address cannot be included in
the subnet of one of the interfaces.
•
Cannot be changed when the LDP ID
has the same address.
0.0.0.0 –
255.255.255.255 (any
legal IP address)
ARP aging time
(sec) The period in seconds that must pass
before ARP entries are discarded 300–100000
Default: 1200