Ace ACE-3105, Инструкция по установке и эксплуатации

Страница: 171 / 418

Installation and Operation Manual Chapter 4 Configuration
ACE-3105, ACE-3205 Ver. 5.2 Configuring for Operation 4-81
Configuring Bridge Parameters
ACE-3105, ACE-3205 supports LAN-to-LAN bridging to allow backhauling of
Ethernet traffic originating from the cellular site/Node B. Accordingly, the two
Ethernet ports of the unit can be used as bridge ports. The bridge functionality
includes support for VLAN-aware bridge in IVL mode, configurable stacking VLAN
tag stripping, learned MAC addresses (up to 512), configurable aging time, and
mapping of the VLAN priority vs. four Ethernet transmit queues.
³
To access the bridge configuration options:
• From the Applications menu (see Figure 4-49
), select Bridge.
The Bridge menu is displayed.
ACE-3205 – RAD Data Communications
Configuration> Applications> Bridge
1. VLAN mode > (Aware)
2. Aging time (sec) ... (300)
3. Bridge ports >
4. VLAN membership >
5. QoS >
>
Please select item <1 to 5>
ESC-previous menu; !-main menu; &-exit
Figure 4-58. Bridge Menu
Table 4-51. Bridge Parameters
Parameter Description Possible Values
VLAN mode Indicates the virtual LAN awareness
mode. Only VLAN-aware (MAC address
+ VLAN based forwarding) is currently
supported. Aware
Aging time
(sec) The period in seconds for entries to age
in the MAC table. If no frame is received
from a specific MAC address, the address
is deleted from the MAC table once the
defined period expires. 300–1000
Default: 300
Bridge ports Access the bridge ports parameters See Configuring the
Bridge Ports
below
VLAN membership Access the VLAN membership parameters See
Setting the VLAN
Membership
QoS Access the quality of service parameters See
Setting the QoS
Parameters