Ace Sports Maxxam 150 2R, Руководство пользователя, Страница: 21 / 78

A. Operation controls
WARNING
- Do not attempt to start or operate the engine until you are completely familiar
with the location and use of each control necessary to operate this vehicle. The operator must
know how to stop this machine before starting and driving it.
a. Throttle
The right foot pedal is the throttle that controls the kart speed. As the engine speed
increases above idle, the clutch automatically engages and moves the vehicle forward. To
disengage the clutch at any time, allow the throttle to return to the idle position.
(See Fig. 1)
b. Brake
The brake is located on the left side of the kart (See Fig.1). Applying pressure to the
pedal draws the brake caliper around the brake pump at the rear wheel and slows or stops
the kart.
c. Start Engine
Insert the key into key-switch, turn the
key clockwise, release the key when the
engine starts. The engine will warm up
within 5 minutes and the engine choke
will close automatically and operate at
the normal RPM (Warning: Don’t crank
starter more than 5 seconds at one time).
d. Engine Stop Button
Important-stop button test. Before
driving this vehicle, test the engine stop
button to assure that it is operating
properly. With the engine running, push
and hold the engine stop button for two
seconds for the engine to shut down.
Figure 1
Each time prior to starting the engine, check the throttle assembly to ensure
that when the pedal is pushed all the way forward the assembly is working
smoothly and returns to idle when released. Do not operate if pedal or engine throttle
linkage fail to return to idle. If unable to correct the problem through lubrication,
adjustment or replacement of worn parts, contact your dealer for assistance.
WARNING
IGNITION START SWITCH
ENGINE STOP BUTTON
LIGHT SWITCH
BRAKE
PEDAL
THROTTLE PEDAL
REVERSE
LEVER
PARKING
BRAKE
P0WER OUTLET
MIRROR
OPERATION
16