park position. Step 2: pull off the key off. Step 3: single chirp and parking light from the
vehicle. Step 4: Close the door after exit. Step 5: Press the button No. 1(lock button).
Note.
This function will be canceled if you didn’t activate the parking brake, press the foot
brake during the process, shut down the engine before completing this function or engaged
in Override(valet) mode.
7) IG Lock(Ignition Lock)
This programmable function can be turned on or off in order to enable your vehicle to lock
the doors automatically when the foot brake pedal is pressed after starting the vehicle with
a key and the vehicle will automatically unlock the doors on pulling the key out from the
ignition
8)
Turbo Mode
You can turn this function on or off in the programming mode. Under this mode, engine
continues running for 2 minutes after key has been taken out from the ignition.
9)
Shock sensor on/off
This function can turn on or off in the programming mode. Under this function, the
shock sensor will activate 25 seconds after the vehicle is armed. If turn this function off,
any impact from the outside of vehicle will not be triggered
10)
Receipt of Signal Disable
This function can turn on or off in the programming mode. The system will not receive
any signal from the system with the vehicle if turn this function on.
