Operation- Single Device
Long line
Short line
Monitor 1
Monitor 2
Monitor 3
1. If monitor 2 needs to be turned off, then follow the instruction below.
2. Press “CH” to enter to the channel selection mode.
3. Press “2” to make channel 2 (output 2) selected and then press “on/off” to turn off or
turn on monitor 2.
Operation- Multiple Devices
7
th
EX-G048
A
1. Assign an ID (0-7) for each EX-G048
A
via the rotary switch. You can assign the same
ID for two or more devices so that you can control these devices simultaneously.
2. Like the above example, if the monitor 15 needs to be turned off, follow the steps
below.
3. Press “ID” and press “Up Arrow” or “Down Arrow” button to make the 7
th
device
selected. (Press up or down arrow until the green LED of the 7
th
EX-G048
A
turns on)
4. Press “CH” to enter to the channel selection mode.
5. Press “menu” to make channel 3 (output 3) selected and then press “on/off” to turn
off or turn on monitor 15.
Monitor 13
Monitor 14
Monitor 15
Short line
Long line
Limited Warranty
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website:
www.ace-plus.com
Page 10 of 11
