Hardware Installation
1. Connect HDMI or DVI source to the video input.
2. Connect S/PDIF or stereo audio source to RCA jack or 3.5mm jack.
3. For connecting to VGA display/projector, link VGA cable to the VGA output connector. For
connecting to component video display/projector, link VGA-to-YPbPr adapter first to the VGA
output connector then link a YPbPr cable between the adapter and the display/projector.
4. Power up the EX-G039.
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website:
www.ace-plus.com
Page
7
of
9
1. Power up the EX-G039. Connect display to
VGA/YPbPr Output
.
2. To learn EDID for HDMI source, pull down the
DIP switch 1 to ON
, the red light will be dark and
bright to indicate the EDID learning process is complete. You DON’T NEED to pull up the DIP
switch again unless you want to learn another EDID by pulling DIP switch 1 up and down.
3. To learn EDID for DVI source, pull down the
DIP switch 2 to ON
, the red light will be dark and
bright to indicate the EDID learning process is complete. You DON’T NEED to pull up the DIP
switch again unless you want to learn another EDID by pulling DIP switch 1 up and down.
EDID Learning
