Supported IR Data Format
Data Format
Suitable
Not
Recommended
NEC
5
RC5
5
TOSHIBA MICOM
CODE
5
GRUNDIG CODE
5
SONY 12 BIT CODE
5
SONY 15 BIT CODE
5
SONY 20 BIT CODE
5
RCA CODE
5
RCM CODE
5
MATSUSHITA CODE
5
MITSUBISHI CODE
5
ZENITH CODE
5
JVC CODE
5
M50560-001P
5
MN6125H
5
MN6125L
5
MN6014_C5D7
5
MN6014-C6D6
5
MC14457P
5
LC7464(AHEA)
5
GEMINI_CM
5
Hardware Installation
1. Connect your HDMI / DVI source (such as a DVD player) to the transmitting unit EX-G009-TX.
2. Connect the IR transmitting cable to the transmitting unit EX-G009-TX, and make the IR emitter
directly point to the IR of HDMI source.
3. Connect your HDMI / DVI display (such as a LCD TV or plasma TV) to the receiving unit
EX-G009-RX.
4. Connect the IR receiving cable to the receiving unit EX-G009-RX, and make the IR receiver
directly point to the user.
5. Connect your LAN cables between the transmitting and receiving units.
6. Make sure your LAN cables are tightly connected and not loose.
7. Plug in 5V DC power cord to the power jack of the receiving unit EX-G009-RX.
8. If a flickering or a blinking image is shown on the display, please try to adjust the rotational
EQ control to improve the cable skew. 0 stands for the strongest EQ while 7 stands for the
weakest. Try adjusting the EQ from 7 to 0.
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website:
www.ace-plus.com
Page
9
of
11