Panel Descriptions
Front View — Transmitting Unit EX-G008-TX
HDMI-IN:
Connect to a HDMI source with a HDMI M-M cable here
Mode
HDMI-IN
Mode:
0 = HDMI mode with surround sound audio output
1 = HDMI mode with stereo audio output
2 = DVI mode
3~5 = Reserved
6 = Use default EDID*
7 = Learn EDID from the display
Note for EDID (Extended Display Identification Data) learning
1. Please connect the display which you want to read EDID with a HDMI cable to the
transmitter’s HDMI-IN and turn Mode to 7 so the TX can learn the EDID information from
the connected HDTV. The LED on the RJ45-OUT of TX will dim and light again in a few
seconds, which indicates the EDID learning process is completed.
2. Turn Mode clockwise from Mode 7 to Mode 0 or Mode 1 for desirable audio setting and
enjoy the experience. DO NOT let the rotary arrow pass by Mode 6 which will erase the
EDID just learned and restore the default EDID.
Rear View — Transmitting Unit EX-G008-TX
+5V DC:
Connect to 5V DC power supply.
RJ45-OUT
+5V DC
RJ45-OUT:
Plug in a CAT-5/5e/6 LAN cable that needs to be linked to the RJ-45 connector of the
receiving unit EX-G008-RX.
Front View — Receiving Unit EX-G008-RX
HDMI-OUT
EQ
Page
4
of 8
/ 2011
Headquarters :
9F.-2, No.190, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 231, Taiwan
Tel : +886-2-2912-4201
Fax : +886-2-2912-3164
E-Mail: [email protected]
Technical Support: [email protected]
http://www.ace-plus.com
http://www.ace-plus.tw
FEB 1
5
Version 1.0
ACE PLUS CORP.
