Ace K9 HA-2520, Руководство по установке

Страница: 7 / 14

6
STEP 5 Horn Alert Feature
A Choice of Positive or Negative Outputs are provided
 Consult your Vehicle Specific Information for horn polarity , wire color, and
connection location
 When other equipment is attached to the horn wire, always place the K9
connection closest to the horn.
5A For Horn Ring Connection. (-)
AceK9 Wire Color: Orange
Wire Connects to the vehicles horn ring wire.
Polarity: The Orange Wire provides a negative low current signal used to activate the
factory horn relay. This signal provides a ground trigger duplicating the traditional horn ring
switch in the horn pad.
Location: In vehicles with grounding horn switches the wire runs down the steering column
to the horn relay or a Control module.
Test: The vehicles horn wire will show ground when the horn pad is pressed (0 volts) and
power when not active (12+ volts) .
Connection: Splices into vehicles horn ring wire.
5B For Connection at Horn (+)
AceK9 Wire Color: Orange/Yellow and Orange/Red Wires
Common on Chrysler, Dodge, and Jeep Vehicles. (See Vehicle Specific Information)
Polarity: Orange/Red wire provides positive power to activate the vehicles horn, The
Orange/Yellow wire Isolates the power to prevent damaging back feed to the vehicles
computer and allows normal activation of the of horn.
Location: Under Hood at the horn wiring.
Test: The vehicle horn wire will show Power when the horn pad is pressed (12 volts)
Connection: Solder and Heat Shrink Connections.
1 Cut the Vehicles horn wire.
2 Connect the K9 Orange/Red to the Horn side.
3 Connect the K9 Orange/Yellow to the fuse block side.