8/
1/
20
22
11
M.2 SSD
Step 1: Ensure the desktop is off, unplugged, and any potential energy is dissipated.
Step 2: Remove the side panel from the chassis as indicated in the “Chassis Cover” section of this
manual.
Step 3: Identify the M.2 SSD on the motherboard, refer to Figure 1 for additional help. Remove
the Philips screw using the PH1 or smaller bit screwdriver, then pull straight back in a parallel
position to remove the M.2 SSD from the slot on the motherboard.
Disposal:
Selective Treatment/Special Handling Per Annex VII, Directive 2012/19/EU: The M.2 SSD
contains a printed circuit board of greater than 10 sq. cm and must be removed from the
device and must be disposed of, or recovered, in compliance with the requirements of Directive
2008/98/EC.