background image

Robot Storm Manual

14

game.

button switch is broken or replaced.

The coin collector is damaged.

Replace coin collector.

  The  signal  line  of  the  coin  collector  is 
loose.

  Check  if  the  signal  line  of  the  coin 
collector is loose.

No  response  to 
coin collector.

IO control board is damaged.

Replace IO control board.  

The sample coin is not placed well.

Please check whether the sample coin is 
placed well, or try another sample coin.

The coin slot is not aligned or deformed.

Please  check  whether  the  coin  slot  is 
aligned or deformed, and adjust coin slot.

Coins  are  blocked 
in 

the 

coin 

collector

The  coin  collector  is  not  assembled 
properly.  The  red  braking  bar  above  the 
coin collector is pressed.

Please re-insert it into the coin collector.

Check whether there is signal feedback.

Please  re-connect  the  coin  collector.  It 
will make a sound if there is signal.

The connected target board is not connected 
to the pull-up resistor.

Please connect the pull-up resistor.

Check  whether  the  token  in  the  coin 
collector  is  the  same  with  that  inserted  in 
the coin collector.

Please replace it with the proper token.

The  gear  of  the  switch  (normally  on  and 
normally off) is incorrect

Please  check  whether  the  gear  of  the 
switch  (normally  on,  normally  off)  is 
correct.

The  coin  collector 
does not score.

The socket outlet of the coin connector is in 
poor contact.

Please check whether the socket outlet of 
the coin connector is in poor contact.

Whether  the  circuit  board  of  the  power 
amplifier is powered on.

Please turn on the switch of the amplifier 
circuit board to power on

The volume is too low.

Please turn the volume up.

Whether the audio connection port falls off 
or is damaged.

Please  re-connect  the  audio  connection 
port.

The  circuit  board  of  the  power  amplifier 
goes wrong.

Please replace the circuit board.

The  speaker  does 
not make a sound.

The speaker goes wrong.

Please replace the speaker.

No lottery fed.

The  ticket  machine  goes  wrong  or  the 
switch is turned on wrongly.

Please  replace  the  ticket  machine  or  set 
the switch to the factory settings.

Shooting  is  not 
accurate.

Check  if  the  potentiometer  of  the  gun  is 
damaged.

Replace  the  potentiometer  and  re-align 
the gun.

Содержание Robot Storm



















Отзывы: