Acdeos AXS FL, Руководство пользователя

Страница: 30 / 38

AXS – Ramp Manual
AXS FL RAMP Manual rev 1 29
8.3 Adjustment of the auto lock
If the auto lock is to loose it could cause rattling. If it is adjusted to tight it can cause problems with closing.
The Lock adjustment is very easy. The lock roll is eccentric. Loosen the M8 bolt in the roll a bit and turn
the roll back wards to loosen, or forward to tighten the lock. In closed position the lock roll should, on the
top, have a little play with the lock arm. Firmly tighten the M8 bolt after adjustment
8.4 Adjustment of the platform
The straightness of the platform can be adjusted at the center hinge. In two possible ways: There are
two M10 bolts at the left and right side of the platform around the center hinge that can adjust
straightness of the platform.
Older versions
;
The M10 bolts are secured by a small setscrew.
Loosen the setscrew with a 2,5 mm Allen key.
Adjust the platform with the two M10 bolts. (6mm
Allen key)
Make sure you adjust left and right in the same
way.
Fix the bolts with the setscrews.
New version;
Take out the large bolt, add or remove conical
rings and tighten the bolt again, make sure there
are equal amounts of conical rings on each of
the bolts. (conical rings part number is AR 380)