ACD Miccolo 02, Руководство пользователя

Страница: 6 / 42

MICCOLO 5
Dear Customer
Congratulations on the purchase of your greenhouse. Thanks to this manual, no technical
foreknowledge is required for assembling the greenhouse. Reading through the manual step by step
will allow you to prepare all necessary parts and acts for the assembly of your greenhouse.
Safety and Efficiency
Glass is heavy, sharp-edged and fragile. A ladder is high and unstable. Aluminium profiles are
sometimes long and sharp-edged. So, be careful when you are not familiar with handling these
materials. Therefore, it is better to keep children away during the assembly. Safety shoes, safety glasses
and safety gloves may therefore be very useful and are essential when assembling glass.
Tools:
-
2x 10mm screw-wrenches
-
Knife or solid scissors
-
Star screwdriver (large type)
-
Flat screw-driver (large type)
-
Spirit level
-
Shovel
-
Rope or measuring rod min. 7 meters
-
Ladder (self-standing)
Tools available in all D.I.Y.-shops:
-
Colourless neutral silicone kit
-
Quick-drying concrete to solidly anchor your greenhouse
Petty Facts
- Bolt slots are slots in which fits a bolt head. Nearly all profiles in this greenhouse have 1 or more
bolt slots.
-
In the event of bolt slot connections, always make sure that the profiles are closely pressed to one
another.
-
Stop bolts are bolts that we slide in a slot in preparation of further assembly; these bolts are
temporarily retained by nuts at some 10cm of the profile end.
-
A greenhouse consists of 2 façades (front and back), 2 sidewalls and a roof.
-
Except when explicitly mentioned otherwise, short bolts (M6X10) are used.
Advice
Always use ALL detailed views as aid to align, line up and position your profile. Pay attention to
section and perforations.
When fixing the nuts on the bolts, only make 2 turns; only definitively tighten the bolts and nuts
after having gone through the entire page.