Accutrol AccuValve AVT4000 Series Скачать руководство пользователя страница 2

Installation & Operation Manual

 - Model AVT4000 

Contents of this Manual are Subject to Change Without Notification

 

Page  ii

 

 

 

LIMITED WARRANTY 

Accutrol  LLC,  having  its  principal  place  of  business  at  21  Commerce  Drive,  Danbury,  CT  USA 
("Manufacturer") warrants its AccuValve

®

, Model AVT4000 product (the "Products") as follows: 

1.  Limited Warranty.  
Manufacturer warrants that the Products sold hereunder will be free from defects in material 
and workmanship for a period of sixty (60) months from the date of purchase.  If the Products do 
not conform to this Limited Warranty during the warranty period (as herein above specified), 
Buyer  shall  notify  Manufacturer  in  writing  of  the  claimed  defects  and  demonstrate  to 
Manufacturer

’s

 satisfaction that said defects are covered by this Limited Warranty.  If the defects 

are properly reported to Manufacturer within the warranty period, and the defects are of such 
type  and  nature  as  to  be  covered  by  this  warranty,  Manufacturer  shall,  at  its  own  expense, 
furnish, replacement Products or, at Manufacturer's option, replacement parts or services for 
the defective Products.  Shipping and installation of the replacement Products or replacement 
parts shall be at Buyer's expense. 

2.  Other Limits. 
THE FOREGOING IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT 
NOT  LIMITED  TO  THE  IMPLIED  WARRANTIES  OF  MERCHANTABILITY  AND  FITNESS  FOR  A 
PARTICULAR PURPOSE.  Manufacturer does not warrant against damages or defects arising out 
of improper or abnormal use or handling of the Products; against defects or damages arising from 
improper installation (where installation is by persons other than Manufacturer), against defects 
in  products  or  components  not  manufactured  by  Manufacturer,  or  against  damages  resulting 
from such non-Manufacturer made products or components.  Manufacturer passes on to Buyer 
the  warranty  it  received  (if  any)  from  the  maker  thereof  of  such  non-Manufacturer  made 
products or components.  This warranty also does not apply to Products upon which repairs have 
been  affected  or  attempted  by  persons  other  than  Manufacturer  or  pursuant  to  written 
authorization by Manufacturer.

  

This warranty also does not apply to any product provided by 

the Buyer and mounted by the Manufacturer to Products.

 

3.  Exclusive Obligation. 
THIS WARRANTY IS EXCLUSIVE.   The sole and exclusive obligation of Manufacturer shall be to 
repair  or  replace  the  defective  Products  in  the  manner  and  for  the  period  provided  above.  
Manufacturer  shall  not  have  any  other  obligation  with  respect  to  the  Products  or  any  part 
thereof,  whether  based  on  contract,  tort,  and  strict  liability  or  otherwise.    Under  no 
circumstances,  whether  based  on  this  Limited  Warranty  or  otherwise,  shall  Manufacturer  be 
liable for incidental, special, or consequential damages. 

4.  Other Statements. 
Manufacturer's employees or representatives' ORAL OR OTHER WRITTEN STATEMENTS DO NOT 
CONSTITUTE WARRANTIES, shall not be relied upon by Buyer, and are not a part of the contract 
for sale or this limited warranty. 

5.  Entire Obligation. 
This Limited Warranty states the entire obligation of Manufacturer with respect to the Products.  
If any part of this Limited Warranty is determined to be void or illegal, the remainder shall remain 
in full force and effect. 

Содержание AccuValve AVT4000 Series






























Отзывы: