background image

[ inspiring people, inspiring change ]

Installation

Installation

WT99 WIRELESS TELEPHONE HEADSET

your true wireless handsfree office solution!

E. Using External Sensor for the Lifter

The internal sensor within the handset lifter is used to pick up the ring tone 
of the telephone and transmit a signal to your headset so you know there’s 
a call coming in while you are away from your desk.

The rechargeable battery of the WT99 headset is a detachable design and 
can be replaced. It is a specific design and user should only use the official 
battery supplied by Accutone. All rechargeable battery has a life-span and 
should  be  removed  from  the  headset  during  extended  period  of  non-
usage. Contact your reseller for replacement battery purchase details.

F. Removing and Replacing Battery

external sensor

But  if  the  ringer  speaker  of  your 
telephone  isn’t  located  below  or 
close to the lifter, you will need to 
use the supplied external sensor.

Flip  over  the  handset  lifter  to 
reveal its bottom-side.

Connect  the  external  sensor 
plug to the

 External Sensor 

Jack  or 

External  Sensor 

Extension Jack if required.

 (J)

(K)

 

TROUBLESHOOT WARNING!

If for any reasons outside of the ones mentioned above, you still do not 
receive any beep tone from your headset when the telephone is ringing, ie. 
telephone  ring  volume  too  low...etc.  Hook  up  the  external  sensor  as 
described  and  try  speaking  into  the  sensor  with  louder  than  normal 
speaking volume, if this still doesn’t generate any beep tone, contact your 
reseller or service center as the sensor may be malfunctioning.

To remove or replace the battery, turn the headset on its back, and open 
the battery compartment from front to back as illustrated above.

Lift up the hatch, the battery is 
connected  to  the  headset  via 
one  connected  cable,  with  a 
white connector.

Carefully  remove  the  battery 
from  the  compartment  and 
holding  the  connector  not  the 
cable, gently disconnect it. 

 

as the chemical inside is harmful 
to human body.

Do not attempt to open the 
plastic  wrap  of  the  battery

rechargeable 

battery

9

10

J

K

Содержание WT99











Отзывы: