troubleshooting pairing
5
(1) VEGA will return to Standby mode if pairing is not completed
within 2 mins. You need to turn it off and repeat the pairing process.
(2) Press and Hold MFB of both units until they flash red ONCE. This
indicates power off. If you press and hold MFB and they flash blue and
then quickly red, it indicates power on. So make sure you press MFB
until you see both units flash a long red color - once.
(3) Pairing of Left and Right units only needs to be done ONCE. Once
the units are paired together, you will not see quick flashes of red
and blue on both units during device pairing, only on the Left.
(4) The Left unit is always the host. With the devices turned off, press
MFB on
both
units for more than 8s, until Left unit flashes blue and
red very quickly. Right unit only flashes blue slowly, indicating Left
and Right units are already paired as explained in step 3 above.
(5) Go to your device for pairing, and
find “Accutone VEGA” under device
list. Connect and enter “0000” if pin
is required.
(6) If this still doesn’t work, try to
“Forget” the previous listing of
“Accutone VEGA” before
repeating the above steps.
wearing the headphone
6
L
L
M
s
(1) Silicon earbuds with stabilizer hook comes in 3 different sizes,
find the one that fits your ears.
(2) Install according to the images above matching the Left and Right
orientation and earhook direction.
(3) Try fitting one earphone in your ear and if it feels loose, rotate the
earhook stabilizer in either direction, as shown below to find a perfect
fit. The stabilizer is supposed to lightly push against your ear fold.
(4) Note that there is more than
one way to wear the headphone,
as the shape of the ear is different
for everyone. Experiment by
rotating it in your ear to find a fit.
(5) Keep in mind that the metallic
ball should always point down-
wards, and make sure left and
right are worn correctly.
6