1. Wearing your headset, open
Control Panel
. Under
Hardware
and Sound
, select
Add a device
.
For Windows Computers
2. Make sure the
LED Indicator
on the headset is still flashing
red and blue. You will see
“BT1000”
under
Select a device
.
Select and click Next. Wait a few moments for the device to
be installed.You should be able to hear the words
“connected”
from the headset.
3. Open
Control Panel
again, select
Hardware and Sound
,
then
Sound,
under
Playback
tab
,
make sure you select the
correct device. Choose
Headphone
if you want to listen to
wide-band music quality. Choose
Headset
if you want to use
it for voice communication. Click
Set Default
and
OK
to
complete.
3. To confirm, select System Preferences > Sound, to see if
BT1000
is selected under
Output
tab and
Input
tab as well.
For Macintosh Computers
2. Make sure the
LED Indicator
on the headset is still flashing
red and blue. You will see
“BT1000”
under
Device
s. Select it
and click
Connect
. Once the headset is connected, you will
see it shown under Devices with the word
“Connected”
, you
will also hear the word from the headset.
1. Wearing your headset, open
System Preferences
. Select
Bluetooth
.
4. If you are using the headset for Skype or any other VoIP
software, make sure you choose
BT1000 Headset
under
Recording
tab as well.
(Make sure your computer is equipped with bluetooth)
- The digital volume control on the headset can directly
adjust the volume settings on Macs and iOS devices. On
Windows, the volume of the headset is adjusted
independently on the system volume.
Using the Headset
- BT1000 has a full-function audio guidance. Here are some
examples:
“Power On”
- Headset is powered on.
“Power Off”
- Headset is powered off.
Check Power
- With the headset powered on, press and hold the
Multi-
Function Button
for 1 second, you will hear an audio
message regarding the battery level.
Powering On/Off
- You will hear a message say
“Power On”
- While headset is on, press and hold
Multi-Function Button
for 2 seconds to power off
Volume Control
- Press - button to decrease audio volume.
- When paired with Macs and iOS devices, the Multi-Function
Button can be used to make/end calls, play/pause music
and various other functions. It may not serve the same
function under Windows or Android devices.
- On iPhone and iPad, the battery of BT1000 will be shown as
an icon on the main screen, or as a percentage under
Batteries in Notification Center.
- Press and hold the
Multi-Function Button
for 2 seconds
- Either during a phone call or audio application, press +
button to increase audio volume until you hear a “beep”
tone, indicating maximum volume.
Multi-Function Button
Audio Guide
“Pairing”
- Headset entering Pairing Mode.
“Connected”
- Headset is connected with at least one device.
- Make sure the
Microphone Chamber
is 2-inch away from
your mouth.
Wearing your Headset
Charging your Headset
- Make sure you plug the USB-A end of the cable to an USB
adapter verified by your local government safety-regulatory
agency.
- Power adapter must be 5V not exceeding 1A current.
- Connect with the supplied Micro-USB cable, or any Micro-
USB charging cable to the headset’s
Charging Jack
.
“Your headset is disconnected”
- Headset is disconnected
from the last connected device.
Low-Battery Indication
- If you hear beeping sound while wearing headset, it means
the battery power is low, time to recharge headset.
Play Time
8h
Battery Monitor for iOS
Supported
Transmission Frequency 2.4 to 2.48GHz
Weight
78g
Multipoint Pairing
Supported
Speakers
Wideband speakers
Transmission Distance
Class 2, 10m/33ft
Microphone
Noise Canceling Microphone
Profiles
HSP, HFP, A2DP, AVRCP
Product Specifications
Bluetooth Solution
Qualcomm CSR Controller v4.1
Codec Support
SBC
Dimensions
160mm x 135mm x 60mm
Bluetooth Password
0000
Bluetooth Device ID
BT1000
Operating Temperature
0 to 40
º
C
Battery
3.7v Li-Polymer, 200mAH
Standby Time
>200h
Usage Warning:
(1) Using this headset to listen to excessive volume may cause permanent damage to your hearing. (2) If not in use for long period of time, recharge battery
every 6-months. (3) Always store the headset with the power off. Avoid storage at extreme temperatures (<-20ºC or >45ºC), otherwise, this can shorten the battery life and
affect speaker operation. Do not expose the headset to rain or any other liquids, clean using a dry clothe only. (4) Do not disassemble.