BT1000
Bluetooth Headset for Business
with Noise-Cancelling Microphone
User Manual
Main Interface & Functions
Interface & Controls
1. Metallic Headband
2. Vol Up (+) Button
3. Multi-Function Button
4. Vol Down (-) Button
5. Micro-USB Charging Jack
6. Rotatable Mic Boom
7. Bendable Mic Boom
8. LED Indicator
9. Foam Ear Cushion
10. NC Microphone Chamber
11. Bluetooth Pairing Button
12. Adapter LED Indicator
1
2
3
4
5
6
7
8
9
10
11
12
Connection & Installation
1. The adapter that comes with the box has been
pre-paired
with this particular BT1000 headset.
3. If your device (ie. Notebook, Smartphone, Tablet or TV box)
comes with bluetooth connection, ALWAYS use the device’s
default connection, do not connect the BT Audio Adapter if
your device has bluetooth inbuilt.
If you are certain your host device does not come with
bluetooth connection:
4. The headset’s
LED Indicator
will lit blue blinking twice every
2 seconds, also indicating Paired and Online.
C. Pairing
2. The
Adapter LED Indicator
will immediately light up blue
with slow blink, indicating Paired and Online.
1. Connect the BT Audio Adapter to any USB port of your
computer/device.
A. Universal BT Audio Adapter
2. There is no need to pair the headset unless the headset fails
to connect.
B. Setup
3. Turn on your BT1000 headset by pressing and holding the
Multi-Function Button
for 2 seconds.
5. Make sure your computer’s audio device is “
USB Audio
Device”.
1. If you are replacing a new headset OR for some reason your
headset no longer connects to the adapter, press and hold
Bluetooth Pairing Button
for 5 seconds until the
Adapter
LED Indicator
flashes quickly, indicating Pairing Mode.
For Smartphones & Tablets under iOS
First of all, switch your BT1000 headset into pairing mode.
- Go to the settings page, select bluetooth, under Available
Devices, select “
BT1000
”, wait for it to connect, and lists
under Paired Devices.
6. Once the LED Indicator on the adapter flashes slowly AND
the LED on the headset switches back to flashing blue only,
the devices are paired.
blue quickly.
5. Wait for about 30 seconds until the units paired, it may take
longer if you are surrounded by various wireless devices like
wireless routers, computers, smartphone or tablets. Try to
turn off bluetooth on your other devices if this process takes
too long.
3. When you see the headset flashing red and blue rapidly, it
indicates the headset is now in pairing mode.
2. Press and hold the
Multi-Function Button
for 5 seconds
until
LED Indicator
flashes quickly red and blue.
7. Pairing completes.
D. Pairing Headset to Other Devices
4. Make sure the
LED Indicator
on the adapter is still flashing
blue quickly.
Follow the same steps as above, pressing the
Multi-Function
Button
for 5 seconds until the
LED Indicator
flashes red and
For Smartphones & Tablets under Android
- Go to the settings page, select bluetooth, under Other
Devices, select “
BT1000
”, wait for it to connect, and lists
under My Devices.