Setup new device from your computer.
4 INSTALLING USB DRIVER & SOFTWARE
Upon starting the installation program, the following welcome screen will be shown,
simply follow the InstallShield Wizard according to the following guide:
4 INSTALLING USB DRIVER & SOFTWARE
accutone USB adaptor - installation guide & user manual
installing USB driver
Setup new device from your computer.
click Next
you have the option to install
only the USB driver or with the
3D Audio Demo program, we
recommend you check both and
click Next
the setup program will install the
AU300 USB software to a default
path and folder
click Next
Please note that in some Windows XP system, you may be prompt at this point
asking you about Windows Logo testing issues, simply ignore this message and
click Continue Anyway to continue installation.
the setup program should begin to
copy files into your system,
after copying all the files, the
program will automatically install the
required drivers into your system,
please be patient as this may take a
little while.
after successful installation of the
drivers, you will have to reboot your
system, and when you do, you should
be able to see the accutone orange
logo displayed on the bottom right
corner icon tray.
The AU300 driver will only operate when connected to the USB port which you
have installed with. If your computer has more than one USB port, you can
determine if the port is the correct one by checking whether the orange
Accutone icon is in the icon tray as shown above.
installing USB driver