part b. begin to operate.
How do I use this device? What can I do with it?
B.1
B.1
part b. begin to operate.
How do I use this device? What can I do with it?
B.1.1 Telephone Pairing
Different telephones have different configurations, so you need to first pair
your amplifier with your telephone. The Telephone Configuration Switch
(13) at the bottom of the unit allows user to effectively select a proper
setting to pair with their telephone by sliding it to different positions, namely
position (1-2-3).
11
10
operating the unit.
operating the unit.
B.1.2 Adjusting the Microphone Gain Level
While you are still online with someone on the other end, check with them
your microphone gain level. Make adjustments to the
Microphone Gain
Level Rotary Control (14)
using the screwdriver provided. Turn clockwise
to increase volume, and counter-clockwise to reduce.
2
13
1 2 3
- -
To pair your amplifier, you need to make
a call to someone. With all the cables
properly connected, make sure all three
buttons on top of the unit are all
released. (There should not be any
white line on in front of the buttons)
Put on your headset and lift up the
handset to call someone, if the person
on the other end cannot hear you or
you cannot hear them, switch to the
next position until you find the best
position, but don’t hang up yet.
no white line!
B.1.3 Adjusting the Rotary Volume Control
The
Rotary Volume Control (2)
located on the top of the unit allows user
to adjust the volume of the headset speaker. Rolling the rotary control up
will increase the volume and rolling it down will decrease it. Do not overturn
the control, as high volume will cause damage to your hearing.
14
clockwise
Increase Volume
* You should only need to make this adjustment ONCE.
3
roll upwards
Increase Volume
Refer to Section B.1.6 for
Safety on Volume Settings.
!
!
