A10 Alpha in action! Comfort & Convenience.
B.1
B.2
15
14
part b. begin to operate.
operating the unit.
operating the unit.
B.2 Troubleshooting
B.1.2 Using Headset with Computer
Switch to Computer position through the Telephone/Computer Application
Switch. Select Headset position from the Headset/Handset Application
Switch for using headset. When a phone call comes in or you want to make a
call but during your computer work, simply switch to Telephone position and
lift the handset from the cradle or press the Speaker-phone button. By
selecting Computer position and place the handset back to its cradle or turn
off the Speaker-Phone button, you can return to your existing computer
work.
PC LINE OUT
PC LINE IN
mute
A10 Alpha in action! Comfort & Convenience.
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
Check if the batteries are too low, replace if required.
Check if the Polarities of batteries are placed correctly.
Make sure the On/Off switched to ON.
Check if the Configuration Switch is properly selected.
Volume Control and Mute button are adjusted properly.
Headset/Handset and Telephone/Computer switches are
properly selected.
Check if the telephone patch cable is properly connected.
Check if the Telephone/Computer switch is selected at
telephone.
Make sure the Configuration Switch is properly selected.
Try other positions until you can hear it well.
Make sure the Mute button is not pressed down.
Use the screwdriver to check if Mic volume is set too low.
Try to select the proper settings with the configuration
switch.
The rotary transmit Mic volume control is set too high.
Reduce this volume or refer to section I.3.3.
Take a look at the connection on your computer where the
cables connect with the A10 amplifier. There should be 3
jacks (line-in, line-out and speaker).
Make sure the line-out cable from the amplifier is
connected to the line-in jack of the computer.
Make sure that the line-in cable from the amplifier is
connected to the line-out jack of the computer and
NOT
the speaker jack.
There is no response
from the unit.
I cannot hear any
dial tone or my
caller speaking to
me on the other
side.
My Caller cannot
hear me at all or
cannot hear me very
well.
I hear my voice too
loud and there is a
squealing sound.
When using with my
computer, the sound
is too loud even
though the volume is
set at minimum.
problem
items to check
part b. troubleshooting.