14
7.2 Program edit
Edit the program which is set before
7.3 Time signal setting
There are ten terms (0-9) in “Time signal time set” screen. NO.0 represent OFF
；
and NO.1 represent ON
，
NO.0 and NO.1 cannot be altered
；
NO.2-NO.9 can be set according to requirement. Explaination as below:
※ ON DELAY
：
time signal act after segment counting started and
（
ON DELAY TIME
）
period passed
。
E.g.
：
Time Signal Model NO.2 with ON DELAY
＝
1hour, if program time setting is 2 hours, and you choose
time signal mode no.2 in this segment.
The result of procedure
：
after program started, 1 hour before signal as OFF
，
1hour later as ON
。
※ CUT ON/OFF
：
use CUTmode or not
（
CUT TIME setting enable after using Cut mode
）
。
E.g.
：
Time Signal Model NO.2 with ON DELAY
＝
1hour and CUT TIME
＝
30min
，
if program time setting is
2 hours, and you choose time signal mode no.2 in this segment
The result of procedure
：
after program started, 1hour before as OFF
，
in the midst of 30mins as ON
，
the last 30mins as OFF
。
“
Time Signal” setting is show as below
