Accutech WI-BR-I-XP, Руководство пользователя

Страница: 8 / 32

Accutech Wireless Base Radio User Manual
2
Rev 1.56
1.2: ABOUT THE DEVICE
The Accutech Base Radio is a reliable Radio Frequency (RF) transceiver
with a variety of available outputs, contained in an explosion proof hous-
ing useable in many hazardous and hard-to-reach areas. The time and ex-
pense of running wires often makes it difficult to measure parameters that
have an economic impact on your plant operation, but the Base Radio al-
lows you to quickly and accurately monitor those devices at fraction of the
cost, giving you bigger and faster returns on your instrumentation invest-
ments.
The Base Radio communicates in a secure, digital protocol over a band of
frequencies from 902MHz to 928MHz. These devices require no wires,
permits or licenses, and are easily setup and installed right out of the box.
The Accutech Base Radio may be used to communicate with many Field
Units in various applications. You can use this device for long-term moni-
toring in remote locations, for short-term data gathering on process condi-
tions, or to quickly test the economic viability of a new installation.
The purpose of this Guide is to help you install and maintain your Ac-
cutech Base Radio.
1.3: UNPACKING Remove the Packing List and check off the actual equipment received. If
you have any questions on your shipment, please call your Accutech Rep-
resentative. Upon receipt of shipment, inspect the container for any signs
of damage in transit. Especially take note of any evidence of rough han-
dling. Report any apparent damage immediately to the shipping agent.
Please note that sometimes units are assembled with accessories when
shipped. Inspect the shipment carefully if you think that something is
missing. This is rare, as we take considerable care to pack units for ship-
ment, but it does sometimes happen. Please give us a call and we may be
able to resolve this matter quickly over the phone.
NOTE
Please note that the carrier will not honor any claims for damage unless
all shipping materials are saved for their examination. If damage is found
during examining and removal of the contents, save the packing material
and the carton.
1.4: SOFTWARE
COMPATABILITY Software for Accutech is revised periodically. Internal device software
may contain portions that are not compatible with previous versions of the
Wireless Instrumentation Manager software.
To ensure software compatibility, Wireless Instrumentation Manager soft-
ware version 1.56.126 or later must be used. If you believe you are experi-
encing software compatibility issues please call Accutech Customer Ser-
vice at (978) 568-0500 or email wireless@adaptiveinstruments.com.