Accusys A12T3-Share, Руководство пользователя, Страница: 21 / 60

1. Introduction
User Guide Page 3-4
3.4 Connect Host Port
A12T3-Share supports four Thunderbolt 3 and one PCIe 3.0 host ports, depends on your plan,
you can create multiple arrays for dedicated host or create an array be visible by all hosts to
build a SAN environment,
The PCIe port can for T-Share Expansion by connecting 2 A12T3-Share RAID systems. (refer
to
Chapter 3.5 T-Share Expansion )
Follow the steps below to setup a host connection,
1. Connect cable to one of host port.
Note
1. Use valid Thunderbolt 3 cable , or the connection will fail.
2. Connect to SAN port (Z2M, C2M) when connect to PCIe host.
2. On RAIDGuardX, create array and select Thunderbolt host port, e.g. plan to build a SAN, set
array can visible for all host ports.
3. Click Create Array , the new volume shell be recognized by host in seconds.