background image

REPLACING THE BATTERY

  1. When the figures on the display start to blink, it is  

    time to replace the battery.
  2. The unit uses one Type CR2032 3-volt lithium battery.
  3. Insert a coin into the slot at the bottom of the body  

    case. Twist the coin to remove the front case.
  4. Locate the BATTERY HOLDING PLATE at the bottom  

    left corner of the inside case. Remove the plate by  

    loosening the two small screws with a small Phillips  

    head screwdriver.
  5. Take out the old battery and replace it with a new  

    battery. Place the battery’s positive (+) terminal  

    FACE UP while you install it into the pedometer.

CLEARING THE MEMORIES

Auto Reset: 

At 3:50 AM every day, the previous day’s STEP 

record is automatically saved and STEP display resets to 0. 

You do not need to press the RESET button every day.

Manual Reset: 

To reset today’s STEP data to 0, press and 

hold the yellow RESET button for 2 seconds. 

Note:

 Resetting 

today’s steps before automatic nightly rollover prevents them 

from being tallied in memory.

System Reset:

 To reset all memories to 0 (including the clock), 

press the recessed SYSTEM RESET button in the lower left 

corner of the front of the display. (Use a pen or the end of 

a paper clip.) 

Note:

 In case of irregular display due to static 

electricity, pressing the SYSTEM RESET button, and then 

resetting the CLOCK, will return the unit to normal.

Terminal

Screws

NO-PROOF-OF-PURCHASE LIMITED WARRANTY

Free service for first year of ownership;  

$12 fee for service thereafter. See label inside unit for date.  

See www.accusplit.com/support for details

    and back case together, then pressing the bottom of  

    the case together. If the two halves don’t go together  

    easily, check if the front case is upside down!
  7.  Reset the CLOCK to restore all functions to your  

    pedometer.

CAUTION: Please DO NOT TOUCH inner pedometer parts, 

other than battery. Touching the sensor mechanism may 

affect the accuracy of the pedometer.
  6. Reinstall the BATTERY HOLDING PLATE  

    by tightening the two  

    screws. Put the case  

    back together by  

    matching the  

    top edges of  

    the front case  

16

17

18

19

Отзывы: