5
STEP 1: Connecting Chest Sensor to
Chest and AccuSom
™
STEP 3: Connecting Breath Sensor
to Face and AccuSom
™
STEP 4: Turning on the
AccuSom
™
Device
3A.
• Tighten the slide ring
upwards under chin.
• Place the Breath
sensor under your
nose (as pictured) with
the two round humps
under your nose. The sensor
is positioned correctly when the single large hole
is on the right side of your face.
• Attach the sensor to your face with a 2-inch piece
of the enclosed tape.
4A.
• Turn device on by pressing ON/OFF button firmly for 2 seconds
and then let go.
• The sensor lights on the unit will flash until each sensor is
placed properly.
• All sensor lights on the AccuSom unit should be GREEN.
The device will announce “System is now recording”.
• If there is an issue with a connector, the AccuSom will announce “Check
sensor”, and one or more lights on the device will flash
yellow, indicating which sensor(s) needs attention.
•
You may go to sleep once
the device is successfully
connected to your arm.
Please note that
device may
be placed below
the elbow.
System is now
recording.
3B.
Connect sensor
to the port on the
bottom of
the device.
