Troubleshooting
The analogue hands block the digital display.
1.
Press and hold the upper left button for three seconds. The hour and minute hand
will retract to the 12 O’clock position allowing a clear view of the digital display.
2.
Press the upper left button to return the analogue hands to the previous position.
The analogue time does not match the digital time for the selected zone.
1.
Push the bottom right hand button until the mode indicator hand points to TME.
2.
Select the time zone on the digital display by pressing the upper right button or the
lower left button.
3.
Press the upper right and lower left buttons simultaneously and release. The hour
and minute hand will go to the time zone shown on the digital display. At this point
the digital display may go to UTC or another time zone. Press the upper right or lower
left button to scroll to the time zone you just set the analogue hands to.
24
