Accurist 0S10, Инструкция по настройке

Страница: 76 / 106

Setting the time and date:
1. Pull the crown out to the 1st position.
2. Turn the crown clockwise until the previous day’s date appears.
Note: Do not set the date between 9:00 PM and 1:00 AM.
Otherwise, the date may not change properly.
3. Pull crown out to the 2nd. click position when the Second hand is at the 12 o'clock
position. Note: When the stopwatch is or has been measuring or is stopped, if the
crown is pulled out to the 2nd. click position, it will automatically reset the Stopwatch
hands to "0".If the alarm has been set and the crown is pulled out to the 2nd.
click position, the Alarm hands will turn to indicate the current time.
4. Turn to set the Hour and Minute hands. Turn counter-clockwise to advance the Hour
and Minute hands past 12:00 AM. Doing so will advance the date to the current date.
Set the Hour and Minute hands to the desired time taking AM or PM into consideration.
5. Push crown back to normal position.
74