Accuris W3101A-120, Инструкции по эксплуатации, Страница: 35 / 64

35
3. The density value of the liquid to be used will be displayed. The default value is equal to
1.0000 (distilled water at 20°C).
4. It is possible to insert a different value using the
CAL and MENU buttons to increase and
decrease the value, while pressing the TARE button to pass to the next value. During the
entering phase, prolonged pressure on the TARE button allows you to cancel the inserted
value.
Note: It is also possible to set the value using the optional alphanumeric keypad.
5. Once the desired value has been set, press the PRINT button.
6. It will now ask you to weigh the solid in the air.
7. Carry out a tare if necessary and load the solid. Wait for the stability symbol to appear and
press the PRINT
button to acquire the value. The word ‘wait…’ will appear during the
acquisition of the value.
8. The weight of the solid in the liquid will then be requested. Carry out the tare of the drum in
the liquid. Put the solid in the drum, immerse the solid, and wait for the stability indicator to
appear. Then press the
PRINT button.
The word ‘wait…” will be displayed during the
acquisition of the value.
Enter the density of the liquid
Density
01-06-10 13:15:24
1.0000 g/cm3
Density
01-06-10 13:15:24
1.0345 g/cm3
Enter the density of the liquid
Density
01-06-10 13:15:24
0.0000 g
Weight in air

-0-