Accuris W3100 Series, Руководство по эксплуатации

Страница: 7 / 16

7
from a reference weight.
1.
Empty the weigh pan;
2.
Press the TARE key to zero the display;
3. “0.0000 g” will be displayed; Press MODE key till the display is %
mode.
4. Place the reference weight onto the weigh pan, and close the doors;
5.
Press the SET key. 100% will be displayed;
6.
Remove the reference weight from the weigh pan;
7.
Place an object to be compared to the reference weight onto the
weigh pan and close the draft shield doors.
8. A percentage value of the deviation between reference and the
sample will be displayed.
3-4 DISPLAY AND CONTROL PANEL
DISPLAY SYMBOLS
g Gram
ct Carat
Lb Pound
oz Ounce
pcs piece counting mode
% percentage mode
○ Indicates the weight is stable
＋ positive indicator
－ negative indicator
······· Waiting
CAL in Calibration starting
CAL dn Load the appropriate calibration weight
CAL ... Calibrating
CAL up Unload the calibration weight
CAL-no Not calibrated properly
CAL end Calibration complete
＋
E
over the max capacity
－
E
under the readability
------ Set key valid
. Reading the data
SAVE --- Saving
S --- END Saving complete