45
It is important to perform speaker confi guration prior to using the
surround sound decoder. It is possible to receive multi-channel surround
sound without a center speaker, but for best results with Dolby Pro Logic
IIx and Dolby Digital decoding, at least 5 speakers (Front Left, Center,
Front Right, Surround Left, and Surround Right) should be used.
Note:
When no action is taken for 5 seconds, the Speaker Setup mode will
be cancelled.
Size of Speakers
1. Press
STANDBY/ON
to turn the unit on.
2. Press
SURROUND
and select a surround mode for 6.1 channel
(such as DOLBY PRO LOGIC IIx MUSIC or MOVIE, etc).
3. Press
SET UP
. SPEAKER SIZE appears on the front panel’s display.
4. Press
ENTER
. FRONT SPEAKER appears on the front panel’s display.
5. Press
ENTER
. FRONT LARGE or FRONT SMALL appears on the
display.
LARGE: Set to LARGE if your speaker can handle full frequency
range (including lower than 100 Hz). For example, if your speaker’s
frequency response is 20 Hz-20 kHz, use LARGE. The complete
frequency range for the channel you are setting will be output
from the speaker.
SMALL: Set to SMALL if your speaker cannot handle lower than
120 Hz. For example, if your speaker’s frequency response is 120
Hz-20 kHz, use SMALL. Frequencies of the channel you are setting
SURROUND
STANDBY
ENTER
