Accurex XRUD, Руководство пользователя

Страница: 62 / 64

Models GPI, GPIP and GPIR
Models GPI, GPIP and GPIR are standard with fully welded construction, wood
nailer, 1-inch insulation, and 2-inch flashing flange. Model GPI is for use on flat
roofs, GPIP for pitched roofs and GPIR is available for ridged (double-pitched)
roofs. Models are available in heights of 12 to 42 inches.
Models GPF, GPFP and GPFR
Models GPF, GPFP and GPFR are standard with fully welded construction. Model GPF
is for flat roofs, GPFP is for pitched roofs and GPFR is available for ridged (double-
pitched) roofs. Models are available in heights of 8 to 42 inches.
Model GPS, GPR
These curbs are designed for use on flat roof decks. They consist of a fully welded
body and 1 inch of insulation. Model GPS is available in heights of 8 inches to 20 inches
with a canted design. Raised cant is available on model GPR.
Model GPFV, GPFVP, and GPFVR
The vented roof curb is typically used for kitchen applications, where the vents allow
hot air and gases to escape between the ductwork and roof curb. Model GPFV is for
use on flat roofs, GPFVP for pitched roofs and GPFVR is available for ridged (double
pitched) roofs. They are designed for use with Accurex’s model XRUB, XRUBS or XRUD
fan to provide the required 40-inch minimum discharge height above the roofline
(per NFPA 96).
ROOF CURBS MODEL COMPARISON
OPTIONS AND ACCESSORIES
• Damper trays
• Insulation (all except GPE, GPFV, GPFVP,
GPFVR and VCE)
• Step for insulation (GPR only - up to 6 in.)
• Double shell construction (all except GPE, GPFV, VCE)
• Single pitch (GPI and GPF)
• Ridge mount (GPI and GPF)
Roof Type/Application Description Model and Service
Flat, pitched or ridged, insulated
or non-insulated roof decks
Welded, straight-sided construction with rigid
fiberglass insulation and 2-inch mounting flange
GPI - All types, sized to
meet your requirements
Flat, insulated or
non-insulated roof decks
Welded, canted construction
with rigid fiberglass insulation
GPS - All types, sized to
meet your requirements
Flat, pitched or ridged,
non-insulated roof decks
Welded, straight-sided construction with rigid
fiberglass insulation and 2 or 5-inch mounting flange
GPF - All types, sized to
meet your requirements
Flat, insulated roof decks
Welded, raised cant construction
with rigid fiberglass insulation
GPR - All types, sized to
meet your requirements
Adaptors/Reducers
Used to match new fans to existing roof
curbs. Welded galvanized steel or aluminum.
Curb adaptors and reducers
For complete product information contact your local Accurex representative.