Accurate Technology ProPanel Classic, Инструкция по эксплуатации

Страница: 14 / 44

P/N 800-1090-104 Rev L102012 Page 14 of 44
Plus (+) & Minus (
–) Keys
Momentarily depressing the
+
or
–
key will increment or decrement the
current displayed value by one unit of measurement. (in, mm, cm or 1/64)
Press & Hold the
+
or
–
key to continue to increment or decrement the
displayed value. The longer the key is depressed, the faster changes occur.
The
+
&
–
keys may be locked out to prevent accidental entries by using
key lock
and/or
Programming Parameter (Pr3).
Datum Key
Momentarily depressing the
DATUM
key forces the Readout to a user
programmed value. This can be zero or any other displayable value.
Set the
DATUM
key value by programming
Parameter (Pr1).
Press and Hold the
DATUM
key for 6 seconds to display the battery voltage.
Press and Hold the
DATUM
key for 9 seconds to display the temperature.
The temperature is displayed in “F” or “C” based on the current units setting
(Inch or Metric).
The
DATUM
key may be locked out to prevent accidental entries by using
key lock
and/or
Programming Parameter (Pr3).
Momentarily Press, or Press & Hold
Momentarily Press, or Press & Hold