Accurate Technology Platinum TwinDrag Reel, Руководство по эксплуатации, Страница: 6 / 12

Bearing Maintenance - The Class 5 A.B.E.C. bearings in the ATD are tephlon impregnated in the ball bearing race;
thus, no lubrication is needed for these bearings.
NOTE: Do not lubricate the two small weep holes on the bottom of the reel. These holes are for water to drain
out of the reel.
Wash down your ATD with fresh water after each use. We recommend lightly spraying it to prevent water from being
forced inside. If heavy pressure is needed put the reel in the “Full” drag position. Do not completely submerge the reel into
water. Wipe the exterior parts with an anti-corrosion lubricant. We recommend Corrosion X® by Corrosion Technologies.
Use a good quality reel oil to lubricate all the parts indicated with the oil symbol.
Periodically, check all exterior screws to make sure they are tight. Screws may loosen over time with boat vibrations.
We recommend yearly maintenance of your ATD reel with a service professional. Preventative maintenance of your ATD
reel will keep the internal parts in proper working condition and prolong the life of the reel.
Storage - When storing your ATD reel, put the reel in “Free Spool” and the clicker in the on position.
MAINTENANCE
Main DragLever
Low Speed Button
High Speed
Button
Five Hex Screws
Preset Button Lock
Clicker on/off
Water
7
Oil
For further details on main-
taing your Accurate ATD
Reel, please visit Tech
Support at our web site:
www.accuratefishing.com/
support/platinum.php