ACCURAT SOLID 1500, Инструкция по эксплуатации

Страница: 33 / 48

31
1. Display
: See section “Display functions
2. Accessory compartment with lid
3. DC5521 DC outputs
: The output voltage is is 13.6V max. 3A per
connection
4. On-board power socket
: 13.6V max. 10A
5. On/off switch for the DC outputs : Controls the DC5521 outputs
and the on-board voltage socket.
6. Main switch and navigation : To switch on the Powerstation, press
and hold the central ON/OFF switch until the display activates.
It is recommended to switch off the unit in the same way when
not in use to conserve battery power and prevent unnecessary
discharge. You can navigate through the settings by pressing up
or down.
7. On/off switch for the USB outputs
8. USB-C Fast Charge outputs (2x)
: If both ports are used simul-
taneously: max. 60 watts each. If only one port is used: max. 100
watt. If your device does not support fast charging, it will charge at
normal speed
9. USB-A sockets (2x)
: Each socket contains two connections.
Maximum 24W per socket
10. LED lights
: The LED lights built into the lid of the accessory com-
partment can be switched on and off by recessed buttons. The
angle of illumination can be conveniently adjusted by moving the
lid to a 120° angle.
11. DC solar/car charging input
: 10V to max. 40V, max. 300W,
max. 8A (12V/24V max. 8A for car charging)
12. Input socket for mains charging and UPS operation
:
220-240VAC, max. 1450W
13. AC switch
: To activate the AC output, press the AC ON/OFF switch
while the Powerstation itself is already switched on via the main
switch
14. 230V AC sockets :
SOLID2000
maximum 2000W output (total).
SOLID2200 maximum 2200W output power (total)