ACCUR8 DWS5100, Руководство пользователя

Страница: 22 / 56

21
5.5 Snooze Mode
If the alarm sounds, and you wish to silence the alarm, press the SNOOZE button, the back-light will turn on.
The alarm icon will continue to flash and the alarm will silence for five minutes. press any button ( MIN/MAX/+,
SET, ALARM, C ) to permanently exit the Snooze mode.
5.6 Backlight Mode
If the LED is off, Press the SNOOZE button once. The backlight will turn on for five seconds, and if no
operation is performed for three seconds, the backlight will turn off.
To save power, the backlight operation is different when operating on batteries.
ADJUSTABLE BACKLIGHT BRIGHTNESS
There are three levels of brightness of backlight. When the backlight is on, press SNOOZE button to switch
between the three levels.
Press and hold the LIGHT button for two seconds, the backlight will turn on permanently, and the BL ON icon
will be displayed for three seconds in the time area.
To turn off the backlight at any time press and hold the SNOOZE/LIGHT button for two seconds. BL OFF icon
will be displayed for three seconds in the date field.
Note: If plugged into AC power, the backlight will remain on. It is not recommended leaving the backlight
on for a long period of time when operating on batteries only, or the batteries will run down quickly.
5.7 Alarm Mode
The DWS5100 includes the following alarms:
•
Time (There are two alarms for time: Alarm 1 and Alarm 2)
•
Wind Gust
•
Wind Average
•
Outdoor Temperature
•
Outdoor Humidity
•
Outdoor Feels Like Temperature
•
Outdoor Dew Point
•
Hourly Rainfall
•
24 Hour Rainfall
•
Absolute Pressure
•
Relative Pressure
•
Indoor Temperature
•
Indoor Humidity
Alarm Operation
When an alarm condition is exceeded, the alarm icon will flash (visual) and the alarm beeper will sound
(audible). To silence the beeper, press any button.