AccuPower AccuManager 807, Руководство по эксплуатации

Страница: 14 / 23

‘STORAGE ’ control Lithium battery
Discharging Lithium battery
This is for charging or discharging Lithium battery not to be used for
the time being. The program will determine to charge or discharge
the battery to the certain voltage depending on the voltage of the
battery at its initial stage. They are different from the type of the
battery, 3.75V for Lilo,3.85V for LiPo and 3.3V for LiFe per cell. If the
voltage of battery at its initial stage is over the voltage level to
storage, the program will start to discharge.
You can set up the current and the voltage
of the battery pack to be charged. The
current will be used for charge or discharge
the battery to reach the ‘storage’ level of
voltage.
The screen shows the present situation
during charge process. To stop charging
press Batt type/Stop key once.
The value of discharge current on the left
side of screen may not exceed 1C for a
maximum safety and the final voltage on
the right should not be under the voltage
level that is recommended by the battery
manufacturer to avoid deep discharging.
To start to discharge, press Start/Enter key
for more than 3 seconds.
(Discharge current:0.1~5.0A)
This shows the present state of discharge.
To stop discharging press Batt type/Stop
key once.