Accuphase PS-1210, Схематическая диаграмма

Страница: 13 / 22

ADJUSTMENT POINT
回 路 調 整 箇 所
− １2 −
VR7:DISTORTION50Hz
VR6:IN /VOLT
VR4:FLASH
VR3:VA
VR2:50Hz
VR1:60Hz
Power Amp (A) Assembly
ﾊﾟﾜｰｱﾝﾌﾟ(A)Ass'y
D & U type
/ 717‑0085‑11
E & B type / 717‑0085‑13
Power Amp (B) Assembly
ﾊﾟﾜｰｱﾝﾌﾟ(B) Ass'y
D & U type
/ 717‑0086‑11
E & B type / 717‑0086‑13
Filter Amp Assembly
ﾌｨﾙﾀｰｱﾝﾌﾟ Ass'y
(714‑0024‑10)
VR1
Test Point / K6
ﾃｽﾄﾎﾟｲﾝﾄ
Test Point / K8
ﾃｽﾄﾎﾟｲﾝﾄ
VR5:OUT/VOLT
TOP VIEW (上 面)
ADJUSTMENT MODE FOR METER FLASHING (STEP10)
メータ調整モード設定 (STEP10 ）
A power switch is turned on with pushing simultaneously the meter switch
S1,and 2, 3 and 5, and it checks that LED 1 and 5 lights up simultaneously.
A power supply is turned off after adjustment.
ﾒｰﾀｽｲｯﾁ S1,2,3,5を 同時 に押 しな がら 電源ｽｲｯﾁを入 れ､LED1､LED5が 同時 点灯 する 事
を 確認 す る｡ 調整 後､ 電源 をOFF し調 製ﾓｰﾄﾞを 解除 する｡
LED1 LED5
S1 S2 S3
S5
POWER
電 源
The lamp for lighting should be used
for the load at the time of adjustment.
調整時の負荷は照明用ﾗﾝﾌﾟを使う事を進めます｡
＋
＋
＋
＝
100W 100W
500W 500W
1200W