HDG-4000 HD/SD/DVI COMPONENT VIDEO CALIBRATION GENERATOR USER MANUAL
10
OSD Menus
User Level
Field –
Set a user defined integer luma value for the User Field in the Gray Field
group. Select Factory and press Enter to restore the original 100% User Field. Select
“Cancel” and press Enter to leave the menu without making any change.
Window
– Set a user defined integer luma value for the User Window in the Gray
Scale group. Select Factory and press Enter to restore the original 100% User
Window. Select “Cancel” and press Enter to leave the menu without making any
change.
Checkerboard
– Set a user defined integer luma value for the User Checkerboard
and User Inverse Checkerboard in the Special group. Select Factory and press Enter
to restore the original 50% User Checkerboards. Select “Cancel” and press Enter to
leave the menu without making any change.
Color
– Set user-defined integer R, G, B values for the User Window and User Field in
the Color 75 and Color 100 groups. The “White” bars in the color bar patterns are also
changed to allow comparison with other known colors. Select Factory and press Enter
to restore the original 75% gray and 100% white colors. Select “Cancel” to leave the
menu without making any change.
The HDG-4 Remote Control manual has more information on entering User values.
Output
CVBS/YC
– Select 0 IRE or 7.5 IRE black level setup for NTSC (480i) CVBS or Y/C
signals.
Channels
– Enable/disable any combination of RGB or YCbCr (YPbPr) output signals.
CVBS C BW
– Select the CVBS (composite video) chroma signal bandwidth.
YC C BW
– Select the Y/C (S-video) chroma signal bandwidth.
Color Matrix
– Select standard YCbCr/YPbPr HD/SD Rec. 709/Rec. 601 color-matrix
encoding, or reverse the encoding (HD/SD Rec. 601/Rec. 709).
HD V Rate
– Select 59.94 or 60.00 Hz HD signals.
Sync
HD DVI
– Select positive or negative HD digital sync.
SD DVI
– Select positive or negative SD digital sync.
HD Y Type
– Select Tri-level or Bi-level HD analog YPbPr embedded sync.
HD G Type
– Select Tri-level or Bi-level HD analog RGB embedded sync (SoG).
HD HV Time
– Select Normal or SMPTE analog RGB HV Sync positioning.
Y/G Phase
– Select sub-pixel analog YPbPr embedded sync positioning.
Scope Trigger
– Select normal analog HV sync or special V sync for an oscilloscope
trigger.
