DGA-6000 ULTRA-HD VIDEO GENERATOR / ANALYZER USER MANUAL
16
Output 2
Sync HD
– Select positive or negative HD/UHD digital sync. Positive is standard.
Sync SD
– Select positive or negative SD digital sync. Negative is standard.
Sync Posn (Position)
– Change Hsync (+/- 99 pixels) and Vsync (+/- 15 lines) position. Use with
overscan pattern to measure H & V overscan precisely in pixels and lines. Use Pos, Neg, and Zero IR
keys to increment, decrement, and zero (reset) sync position.
Note: Many displays no longer use sync signals to position the video frame, so Sync Position will have no
or unpredictable effect on those displays. Some displays may use Hsync position to determine the Cb/Cr
phase for YCbCr 4:2:2 signals and changing Hsync Position may alter color on those displays.
I-Motion
– Selects how interlaced fields sync to motion patterns. See Appendix B, the Motion Patterns
manual, for details.
Edges
- Selects Fast or Slow video horizontal edge transitions. The Slow Edge mode enables a slower
edge rate chosen specifically for each video format. The currently selected Output LED will blink slowly
when the Slow Edge mode is enabled.
HDR
– Selects HDR10 (or OFF) High Dynamic Range mode for UHD (or HD) formats. The HDR10
standard requires a UHD format and Rec 2020 color encoding, so they are also enabled. For non-
standard testing purposes, HDR10 can be enabled for HD formats, and Rec 2020 can then be disabled in
the HDR10 mode. Not available for YCbCr 4:2:0 output signals.
Rec2020
– Selects Rec 2020 or Rec 709 color encoding for UHD (or HD) formats. Rec 2020 requires
UHD 10-bit or 12-bit color component depth so selecting Rec 2020 will also enable 10-bit YCbCr 4:4:4 or
RGB Deep Color, or 10-bit YCbCr 2:2:2 output. For non-standard testing purposes the 10-bit component
depth can then be disabled. Not available for YCbCr 4:2:0 output signals.
Info
Version
– Serial number, firmware version, and options information.
Disp Time
– Selects the time duration that pattern names are displayed when switching patterns. The IR
remote control INFO key will also continuously display pattern names if desired.
Gamut HDR
– Select Rec 2020 or DCI-P3. Changes the CIE xyY target values shown on the OSD
Color75/Color100 Pattern Information Bar for HDR signals to the color gamut defined by the selected
standard. The default standard is ITU Rec. 2020. This setting has no effect on generator signals.
Gamut SD60
– Select Rec709, SMPTE-C, or EBU. Changes the CIE xyY target values shown on the
OSD Color75/Color100 Pattern Information Bar for SD 60 Hz (480i/p) signals to the color gamut defined
by the selected standard. The default standard is SMPTE-C. This setting has no effect on generator
signals.
Gamut SD50
– Select Rec709, SMPTE-C, or EBU. Changes the CIE xyY target values shown on the
OSD Color75/Color100 Pattern Information Bar for SD 50 Hz (576i/p) signals to the color gamut defined
by the selected standard. The default standard is EBU. This setting has no effect on generator signals.
