Figure 3
To view meter information/status click on the `Status' tab and select the information you would
like to view:
Device Information:
This page will display meter information such as the model, serial
number, firmware version and device address of the meter. It will also provide the serial
number, firmware version, hardware version and MAC address of the AXM-WEB module.
Alarm Status:
This page will display the alarm log of the meter. It will provide the status of up
to 16 alarm events indicating the parameter, value and timestamp of the alarm event.
I/O
: This page will show the status of the I/O Modules that are connected and their values. I.E.
Relay Output status(on/off), DI status and etc.
SOE:
This page shows the Sequence of Event log for the enabled I/O module with timestamps.
Figure 4
